|
|
|
|
|
|
|
Novinium’s P1816 Cable Prep Guide This course provides background on cable and component design and detailed best practices on how to prepare cables for the installation of dead-front terminations, live-front terminations, and splices. The authority for the course content is derived from “IEEE® P1816™ Guide for Preparation Techniques of Extruded Dielectric, Shielded Cable Rated 2.5 kV through 46 kV and the Installation of Mating Accessories.” Likely to publish in 2012, P1816 was prepared by the Insulated Conductor Committee (ICC) of the Institute of Electrical and Electronic Engineers (IEEE). Novinium had a large influence in the writing of this guide. About the Course Format One of the great features of Computer-Based Training (CBT) is that you may progress at your own pace. If you do not achieve a passing on the first attempt – no worries! – you may re-take the test as many times as required. Because the CBT software randomizes the questions from a larger pool of questions and randomizes the order of the answers, you cannot pass the test without actually knowing the course content. We highly recommend working through the rich multi-media learning experience before taking the tests. Lessons within the Cable Prep Guide Course Lesson 0 – Introduction. This free 5-minute lesson gives you an overview of the entire course and familiarizes you with the rich-media format. FREE. Login or Create a New Account to take this course. Lesson 1 – Medium Voltage Power Cable Basics. Explains the structure of a power cable, as well as the individual layers, and their functions. $59. Login or Create a New Account to take this course. Lesson 2 – Accessories and Cable Inspection. Explains the purpose, functions, types, and sizing of cable accessories, as well as how to inspect a cable, and what corrective actions to take if damage is found. $59. Login or Create a New Account to take this course. Lesson 3 – Preparation of Cable Layers. Details the requirements and techniques for removing cable jackets and metallic shield layers, along with preparing insulation shield semiconductors, cable insulation, and conductors for the installation of connectors and accessories. $59. Login or Create a New Account to take this course. Lesson 4 – Conductor Preparation and Accessory Installation. The final lesson in the course explains the final steps in getting a cable ready for accessory installation, including conductor and connector preparation, connector installation, and the final cleaning, and inspection stages. It also lists special techniques for installing molded, cold-shrink, and heat-shrink accessories, and details on how to connect cable neutrals, as well as how to re-jacket a cable. $59. Login or Create a New Account to take this course. Purchase the Entire Course for $179 (a $57 savings!) Login or Create a New Account to take this course.
|
|